SM ALFOplus2 - Out of Band Management

70 MN.00356.E - 003
10 MANAGEMENT: OUT OF BAND/IN BAND
10.1 GENERAL
Management configuration can be:
• Out of Band (factory default) – Traffic and management use separate ports (This is a simulated Out
of Band: a dedicated VLAN, the VLAN1, is used)
- Traffic port – LAN1, LAN2, LAN3, LAN4
- Management ports – MNGT (VLAN1 factory default)
• In Band – Traffic and management use the same ports with management in a defined and specific
VLAN not used by traffic
- Traffic ports – LAN1, LAN2, LAN3 and LAN4
- Management ports – LAN1, LAN2, LAN3, LAN4 and MNGT (VLAN127 in the example).
Fig.40 - Names of all Ethernet ports
10.2 OUT OF BAND MANAGEMENT
Out of Band Management configuration can be made by WEBLCT or by CLI.
This is the default configuration but, just in case, it can be created again:
•WEBLCT
- MNGT VLAN creation (Vid=1)
- Address
- Agent IP Address
LAN1
Optical 1/2.5G
ALFOplus2
Gi 0/7
LAN2
Optical 1/2.5G
Gi 0/9
LAN3
Electrical 1G
Gi 0/6
LAN4
Electrical 1G
Gi 0/5
MNGT
Electrical 100M
Gi 0/4
Gi 0/3
TRX
2.5G