MN.00356.E - 003 7
Section 1.
USER GUIDE
1 DECLARATION OF CONFORMITY
SIAE MICROELETTRONICA
Via Buonarroti, 21 - Cologno (MI) - Italy
DECLARES
THAT THE PRODUCT
Digital Radio Relay System ALFOplus2
complies with the essential requirements of article 3 of the R&TTE Directive (1999/05/EC)
and therefore is marked:
The following standards have been applied:
EN 60950-1:2006 and EN 60950-22:2006
“Safety of information technology equipment”
EN 301 489-4 v.2.1.1 (2012-11)
“Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMag-
netic Compatibility (EMC) standard for radio equipment and services; Part 4: Specific conditions for fixed
radio links and ancillary equipment and services”
ETSI EN 302 217-2-2 V2.2.1 (2014-04)
“Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part
2-2: Digital systems operating in frequency bands where frequency co-ordinated is applied; Harmonized
EN covering the essential requirements of Article 3.2 of R&TTE Directive”
The equipment makes use of non-harmonized frequency bands. Following the requirements
of the R&TTE Directive (article 12) and the relevant decision of the EC, in term of classifica-
tion of Radio Equipment and Telecommunications Terminal Equipment and associated iden-
tifiers, the transmitting equipment shall carry the 'class 2' identifier:
Cologno Monzese, 14/04/2015 On behalf of SIAE MICROELETTRONICA
Chairman and Executive Officer
Alberto Mascetti
To Next Page
Loading...