SolaX Power X3-IES Series User Manual

151
Operation on LCD
“MicroGrid”
“Advance Setting”
“Self Test”
“GMPPT”
“Modbus”
“External ATS”
“Power Factor”
“Safety Code”
“Grid Parameters”
“Charger”
“Export Control”
“Meter/CT Settings”
“Pu Function”
“FVRT Function”
“Power Limit”
“DRM Function”
“Parallel Setting”
“Advance Setting”
“ExternalGen”
“Reset”
“Battery Heating”
“Extended BAT FUNC”
“Hotstandby Setting”
“Main Breaker Limit”
“Phase Unbalanced”
“EPS Setting”
“AS4777 Setting”
“Pgrid Bias”
“Internal485”
“Battery Charge EVC”
“Advance Password”
Figure 9-7 Advance setting diagram
• “About”
About
Inverter
Battery
Internal code
Figure 9-8 About diagram
NOTICE!
Property losses or system damage due to unauthorized access to the system when the
keys on the LCD are mistakenly pressed.
• System ON/OFF, Work Mode can be set and System Status, Parallel Status, History
Data and About can be browsed without any password. Keep the system out of reach
of children.
NOTICE!
Property losses or system damage due to unauthorized access to the system when the
user password is used.
• Date time, language, work mode, dry contact ect. under the User Setting can be set
under the permission of user password by users. Replace the user password with a
new secure password immediately. Advance Setting can only be set by installers.

SolaX Power X3-IES Series Specifications

General

Brand	SolaX Power
Model	X3-IES Series
Category	Inverter
Language	English