49
5 Unpacking and Inspection
The number of battery cartons will be different due to different modes of mounting.
Therefore, please check whether the number of cartons received are correct before
unpacking. For details, please refer to the following table.
Table 5-1 Number of cartons
One Tower Two Towers
Floor Mounting
A BMS carton, and carton(s) of
battery modules
A BMS carton, a series box carton,
and carton(s) of battery modules
Wall Mounting
A BMS carton, a base support
carton, and carton(s) of
battery modules
A BMS carton, two base support
cartons, a series box carton, and
carton(s) of battery modules
NOTICE!
• As for the number of cartons of battery modules, it depends on how many battery
modules the users purchased.
5.1 Unpacking
• The devices of X3-IES system undergo 100% testing and inspection before
shipping from the manufacturing facility. However, transport damage may still
occur. Before unpacking the devices, please verify that the model and outer
packing materials for damage, such as holes and cracks.
• Unpacking the inverter according to the following figure.
1
2
3
Figure 5-1 Unpacking the inverter
To Next Page
Loading...
Need help?
General
