89
Electrical Connection
NOTICE!
• The above-mentioned cables are delivered with the Accessories of Series Box.
7.1.2 Wiring Procedure
WARNING!
• Only the qualified personnel can perform the wiring.
• Follow this manual to wire connection. The device damage caused by incorrect
cabling is not in the scope of warranty.
CAUTION!
• Use insulated tools and wear individual protective tools when connecting cables.
NOTICE!
• In the case of one tower, the BMS does not need to conduct wiring. The short power
cable, short-circuit plug, and waterproof cap will be connected before delivery.
And in that case, please don't remove the short power cable, short-circuit plug, or
waterproof cap.
• The wiring procedure for both floor mounting and wall mounting is the same.
• Take the wiring procedure for two towers in the mode of floor mounting as an
example.
To Next Page
Loading...
