210
Decommissioning
Figure 12-18 Disassembling the meter cable
Figure 12-19 Disassembling Grid and Load cables
Step 22: Reinstall the original caps back to the ports of the device. Rmove the device from
the wall and disassemble the wall-mounting bracket.
12.2 Packing the devices of X3-IES system
• Load the inverter, the devices of battery system into the original packing material
if possible.
• If the original packing material is not available, you can also use the packing
material which meets the following requirements:
»
Suitable for the weight of product.
»
Easy to carry
»
Be capable of being closed completely
12.3 Disposing of the devices of X3-IES system
Please dispose of the inverters, the devices of battery system or other accessories in
accordance with the disposal regulations for electronic waste which is applied at the
installation site.
To Next Page
Loading...
Need help?
General
