46
Preparation before Installation
4.2 Tools Requirement
Installation tools include but are not limited to the following recommended ones. If
necessary, use other auxiliary tools on site.
Hammer drill
Marker
Multimeter
Cross screwdriver
Measuring tape
Flat-head
screwdriver
Utility knife
Allen key
Wire stripper
Crimping tool
for RJ45
Crimping tool for
PV terminals
Diagonal pliers
Rubber mallet
Torque wrench
Crimping tool
Spirit level
Crimping tool for ferrules
Wire cutter
Safety gloves Safety boots
Safety goggles
Anti-dust mask Torque wrench (M4)
MC4 crimping tool
To Next Page
Loading...
