1
1 Safety
1.1 General Safety
The X3-IES system has been meticulously designed and thoroughly tested to comply
with all relevant state and international safety standards. Nevertheless, like all electrical
and electronic equipment, safety precautions must be observed and followed during
the installation of the inverter to minimize the risk of personal injury and ensure a safe
installation.
Please thoroughly read, comprehend, and strictly adhere to the comprehensive instructions
provided in the user manual and any other relevant regulations prior to the installation of
the inverter. The safety instructions in this document serve as supplementary guidelines to
local laws and regulations.
SolaX shall not be liable for any consequences resulting from the violation of the storage,
transportation, installation, and operation regulations outlined in this document. Such
consequences include, but are not limited to:
• Devices damage caused by force majeure events, such as earthquakes, floods,
thunderstorms, lightning, fire hazards, volcanic eruptions, and similar events.
• Devices damage due to human cause.
• Usage or operation of the devices in violation of local policies or regulations.
• Failure to comply with the operation instructions and safety precautions provided
with the product and in this document.
• Improper installation or usage of the devices in unsuitable environmental or
electrical conditions.
• Unauthorized modifications to the product or software.
• Devices damage occurring during transportation by the customer.
• Failure to adequately maintain the equipment. An on-site inspection should be
carried out by a qualified technician after 120 months of continuous use. If more
than 120 months have been passed since the date of commissioning, or the user
cannot prove that the equipment has been adequately maintained
• Storage conditions that do not meet the requirements specified in this document.
• Installation and commissioning performed by unauthorized personnel who
lack the necessary licenses or do not comply with state and local jurisdiction
regulations.
• A cement wall is required for the installation of X3-IES system. When the wall
mounting is selected, please ensure that the thickness of any section of the wall
should be greater than 150 mm. When the floor mounting is selected, the wall
thickness of should be larger than 100 mm.
To Next Page
Loading...
Need help?
General
