10
Product Overview
PV Array
The PV array works in MPPT mode. For 4.0 kW, 5.0 kW and 6.0 kW inverter, the
number of PV string is two. For 8.0 kW, 10.0 kW, 12.0 kW and 15.0 kW inverter, the
number of PV string is three.
CT/ Meter
A CT or meter is used for detecting the input and output current on the grid side.
Grid
380V / 400V grid are supported.
SolaX Cloud
SolaX Cloud is an intelligent, multifunctional monitoring platform that can be
accessed via wired or wireless connections. With the SolaX Cloud, the operators
and installers can always view the real-time data.
DRM
DRM is applicable for AS NZS 4777.2-2015. With the use of an external control
box, active or reactive power regulation can be realized in a timely and fast
manner, and the inverter can be operated stably during the process of regulation.
Adapter Box
SolaX Adapter Box is matched with a heat pump with dry contact function,
which can realize heat pump integrated photovoltaic inverter energy system
management.
Datahub
SolaX DataHub is a device for monitoring platforms of photovoltaic power
generation systems, which enables data detection, storage, output control,
centralized monitoring, and centralized maintenance of devices such as inverters,
electricity meters, and environmental monitoring instruments in photovoltaic
power generation systems.
EV Charger
SolaX EV Charger is used for charging electric vehicle.
Generator
A generator is a device which can be matched with X3-IES system to supply
energy in places where there are frequent power outages.
X3-Matebox G2
SolaX X3-Matebox G2 is a device that integrates switches and a bidirectional
electricity meter and provides centralized management of the power supply to
the home. The device can only be installed when the X3-IES system is not in
parallel.
X3-PBOX-60kW-G2/ X3-PBOX-150kW-G2
SolaX X3-PBOX-60kW/ 150kW-G2 is a changeover device used for parallel
connection of multiple SolaX three-phase hybrid inverters within a single system,
To Next Page
Loading...
Need help?
General
