iii
Preface
About this Guide
This manual contains information needed to safely operate your InSight
®
X3
™
laser
system.
This product has been tested and found to conform to the provisions of Directive
2006/95/EC governing product safety and to the provisions of Directive 2004/108/EM
governing electromagnetic compatibility. Refer to the “CE Declaration of Conformity”
in
Chapter 2, “Laser Safety and Compliance,” for a complete list of directives to which
this system has been tested and found in compliance.
This product conforms to the requirements of 21 CFR 1040.10 CDRH. This equipment
has been designed and tested to comply with the limits for a Class
A digital device
pursuant to 47
CFR Part 15 of the FCC Rules.
Every effort has been made to ensure that the information in this manual is accurate. All
information in this document is subject to change without notice. Spectra-Physics
makes no representation or warranty, either express or implied, with respect to this
document. In no event is Spectra-Physics liable for any direct, indirect, special,
incidental, or consequential damages resulting from any defects in this documentation.
If you encounter any difficulty with the content or style of this manual, please let us
know. The last page is a form to aid in bringing any such problems to our attention.
Thank you for purchasing Spectra-Physics instruments.
Overview of this Guide
The InSight X3 User’s Manual includes the following sections:
Chapter 1, “Introduction,” contains a brief description of the InSight X3 laser
system, its power supply and chiller and the control devices. It concludes with
specifications and outline drawings.
Chapter 2, “Laser Safety and Compliance,” is an important chapter on laser safety.
The InSight X3 is a Class IV laser and, as such, emits laser radiation that can
permanently damage eyes and skin. This section contains information about these
hazards and offers suggestions on how to safeguard against them, as well as
maintenance that must be performed to keep the system in compliance with CDRH
regulations. To ensure that your system remains in compliance with CDRH
regulations and to minimize the risk of injury or expensive repairs, be sure to read
this chapter and follow the instructions.
Chapter 3, “Controls, Indicators, and Connections,” describes the InSight X3
system controls available to the user.
To Next Page
Loading...
