4-1
CHAPTER 4: Receiving and Inspecting
Inspecting the Shipment
Your InSight
®
X3
™
laser system was packed with great care, and its containers were
inspected prior to shipment—they left Spectra-Physics in good condition. Upon
receiving your system, immediately inspect the outside of the shipping containers. If
there is any sign of damage, call Spectra-Physics immediately and insist that a
representative of the carrier be present when the contents are unpacked.
Inspect the system in the following order:
1. Do a complete exterior inspection.
2. Photograph any damage thoroughly for insurance purposes.
3. Contact the factory if damage is apparent.
4. Open the container(s) only when requested to do so by the factory, and follow their
directions as you inspect the system.
Exterior Inspection
Figure 4-1 Tilt and shock watches
Do NOT open ANYTHING unless directed to do so by
Spectra-Physics!
To Next Page
Loading...
