For connection to a coupling A-frame, the hoeing implement can be
equipped with a quickhitch counterpart:
The quickhitch counterpart
corresponds to ISO 11001-2.
ATTENTION
When visibility is poor, have a second person help with
manoeuvring.
1. Back the tractor with implement or combination implement and
coupling A-frame straight up to the hoeing implement with quick‐
hitch counterpart.
2. Using the three-point linkage, lower the coupling A-frame so that it
ts exactly into the quickhitch counterpart.
3. Slowly and carefully reverse until the coupling A-frame is exactly
inside the quickhitch counterpart.
4. Using the three-point linkage, carefully lift the coupling A-frame a
little bit.
ð
The coupling A-frame automatically engages in the quick‐
hitch counterpart.
Connection with coupling A-frame
Attaching
en-GB | Item no. 17513597 | BA 02/05-2022 51
To Next Page
Loading...