Steketee EC-WEEDER - Page 90

Horizontal inclination
A
:
To adjust the angle of the disc for soil removal, lengthen or shorten the
expansion bush
1
.
1.
Undo the hexagon nut
2
.
2. Turn the expansion bush in the desired direction.
3. Tighten the nut.
Vertical inclination
B
:
1.
To adjust the disc to the angle of the ridge, undo the screw
3
.
2. Move the index bar in 5° steps.
3. Tighten screw.
Ridge plough: Width
1. Undo the screws in the slot.
2. Move the extension plates.
3. Retighten the screws.
Adjusting heavy hoeing disc
1 A
A
3
B
B
2
1
Expansion bush
3
Screw for index bar
A
Inclination for soil removal
B
Inclination to ridge
2
Hexagon bolt expansion bush
Ridger
Operation
en-GB | Item no. 17513597 | BA 02/05-2022 84