Stratasys Objet260 - Page 177

Objet260 User Guide 6 Operating and Maintaining the Objet260 3DPrinter
DOC-37004 Rev.E 6-44
6. Inthefollowingscreen,selectContinuewithHeadoptimizationifyouhave
recentlycleanedtheprintheads.Otherwise,cancelthewizardandrunthe
HeadCleaningwizard.
Figure6-56Cleanprintheadsscreen
7. Inthefollowingscreen,makesureOptimize all print headsisselected,
andclickNext.
Figure6-57Procedureselectionscreen