Stratasys Objet260 - Page 78

Objet260 User Guide 5 Using Objet Studio
DOC-37004 Rev.E 5-44
Grouping and
Ungrouping
Objects
Youcanmanipulatetwoormoreobjectsonthebuildtray,atthesametime.
•Selectingmultipleobjects
Manipulatingdonetooneobjectaffectsallselectedobjects.Forexample,
turningoneobjectonitsaxiscausesallselectedobjectstoturnontheir
respectiveaxes.
•Convertingtheobjectstoanassembly
Separateobjectsbecomepartsofoneunit.Forexample,turningthe
assemblyonitsaxiscausesallitscomponentpartstoturnasoneunit.
Toconvertobjectstoanassembly:
1. Selecttheobjects(see"SelectingObjects"onpage5-21).
2. FromtheObjectmenu,selectGrouptoAssembly.
Inthemodeltree,theobjectsnowappearaschildrenofaparent
(assembly).
Figure5-50Assemblyinthemodeltree
Aftercreatinganassembly,youcansaveitasanobjdffile,forre-use.(Saving
theassemblyisnotnecessaryformanipulatingandprintingit.)
Tosaveanassembly:
1. Selecttheassembly(eitheronthebuildtrayorinthemodeltree).
2. FromtheObjetStudioCommandsmenu ,selectSaveAs.
3. IntheSave As dialogbox,selecttheobjdfformat,choosealocation,name
thefile,andclickSave.