System CRUs
1-10
Stratus ftServer 2600, 4500, and 6300 Systems: Operation and Maintenance Guide
(R639)
Virtual Technician Module (VTM) port
The VTM connects to the Internet over the VTM port. The VTM enables authorized
system administrators to manage and diagnose the ftServer system from the local
system or, more typically, from a remote management system. VTM functionality is
combined with that of the Baseboard Management Controller (BMC) in a single
hardware component.
Power Distribution Unit (PDU)
A PDU distributes and manages power for the system and peripheral components.
Peripheral Components
See the
Stratus ftServer Systems: Peripherals Site Planning Guide
(R582) for
descriptions of supported peripheral components, such as monitor units, keyboards,
tape drives, and storage systems.
System CRUs
Ta bl e 1- 1 alphabetically lists the ftServer 2600, 4500, and 6300 system
customer-replaceable units.
See the
ftScalable Storage: Operation and Maintenance Guide
(R600) or the
ftScalable Storage G2: Operation and Maintenance Guide
(R650) for information
about removing and replacing CRUs in an ftScalable Storage system.
Table 1-1. Customer-Replaceable Units
CRUs
Bezels Modem assembly
CPU-I/O enclosure covers PCI adapters—full-height and
low-profile
CPU-I/O enclosures PCI riser assembly and its adapters
CPU-I/O enclosure fans Plenum
DIMMs Power distribution units (PDUs)
DVD drive Power supply unit (PSU) fan
Internal hard disk drives System backplane assembly
Front panel assembly
To Next Page
Loading...
