General Safety Precautions
4-4
Stratus ftServer 2600, 4500, and 6300 Systems: Operation and Maintenance Guide
(R639)
After replacing a CRU, do the following:
• Replace the bezels, if applicable, and close the cabinet doors.
• Place the component in service if it is out of service.
• Verify system operation.
• Package and ship the failed component. See “Repacking CRUs” on page 4-3.
General Safety Precautions
• To help identify problems that might occur during the CRU removal and
replacement, read the entire procedure before performing it.
• Provide the space and illumination necessary to safely perform the procedure.
• Conduct all activities in compliance with all applicable industry safety standards
and practices.
• When performing maintenance procedures, do not wear conductive articles or
material such as rings, bracelets, keys, chains, garments with metallic thread, and
so forth.
To Next Page
Loading...
