Storing CRUs
4-2
Stratus ftServer 2600, 4500, and 6300 Systems: Operation and Maintenance Guide
(R639)
Figure 4-1. Shipping Impact Indicators
To unpack the CRU
1. While observing any printed directions or warnings, carefully open the package.
2. Carefully remove the protective packaging and save it for possible reuse in storing
or returning a CRU.
3. Verify that you received the correct CRU by checking the packing slip and the bar
code label on the CRU.
4. Inspect the CRU for shipping damage.
5. If the CRU is wrapped in an antistatic bag, keep it in the bag until it is installed. If
you are not going to install the CRU immediately, protect it from damage by
repacking it in its shipping package.
Storing CRUs
If you need to store a CRU, keep it in the protective packaging and take the following
precautions:
• Ensure that the CRU is right-side up by following the directions on the carton.
• Comply with all warning labels.
• Avoid placing the CRU in a location where heavier items might be placed on it.
dco054
TILTWATCH PLUS
TILTWATCH PLUS
SHOCKWATCH
Warning
Handle with care
DO NOT TILT THIS CARTON
PAST DEGREES
DAMAGE MAY OCCUR IF CARTON IS
TILTED PAST INDICATED DEGREES
WARNING
HANDLE
WITH CARE
ShockWatch
To Next Page
Loading...
