Preface
ix
Preface
The
Stratus ftServer 2600, 4500, and 6300 Systems: Operation and Maintenance
Guide
(R639) describes how to operate and maintain an ftServer 2600, 4500, or 6300
system. It explains how to start up and shut down the system, how to interpret system
operational status based on the state of the light-emitting diodes (LEDs), and how to
remove and replace the customer-replaceable units (CRUs).
This document is intended for anyone who monitors and maintains ftServer 2600,
4500, or 6300 system hardware.
Revision Information
This manual is a revision. It notes support of the ftScalable Storage G2 storage
systems.
Notation Conventions
This document uses the notation conventions described in this section.
Warnings, Cautions, and Notes
Warnings, cautions, and notes provide special information and have the following
meanings:
A warning indicates a situation where failure to take
or avoid a specified action could cause bodily harm
or loss of life.
A caution indicates a situation where failure to take or
avoid a specified action could damage a hardware device,
program, system, or data.
A note provides important information about the operation
of an ftServer system.
To Next Page
Loading...
