Struers LaboPol-30 - Page 57

Operation mode
User levels
You can select three different user levels as operation mode.
• Production
Methods You can select and view methods.
Options You can edit some settings.
• Development
Methods You can select, view and edit methods.
Options You can edit some settings.
• Configuration
Methods You can select, view and edit methods. You can
configure bottles.
Options You can edit all settings.
Change operation mode
To change the operation mode, do the following:
1. From the Main menu select Configuration > Options > Operation mode.
2. Enter the pass code.
3. Enter the pass code. See New pass code ►57.
4. When the Select operation mode dialog is shown, select the desired operation mode and
confirm your selection.
New pass code
When you access the Operation mode menu, you will be prompted to enter a pass code. The
default pass code is ‘2750’.
Changing the pass code
You can change the pass code from the Operation mode menu.
Note
Make a note of the new pass code.
To change the pass code, do the following:
8 LaboForce-100
LaboPol-30 57