SummaCut User’ s Manual
Maintenance and Cleaning 4-3
4.2 OPERATING VOLTAGE
The power entry module detects the line voltage and switches automatically between
110V and 230V.
The fuse is at the back next to the power inlet (refer to fig 1-2).
The fuse rate is T2.0A, 250V Schurter SPT or equivalent for all voltage ratings.
!
SAFETY WARNING
Before changing the fuse, be sure to disconnect the cutter completely.
CAUTION
For continued protection against risk of fire, replace only with same
type and rating of fuse.
FIGURE 4-2
POWER ENTRY MODULE
1. Power entry module
2. Fuse holder
3. Fuse
To Next Page
Loading...
