SummaCut User’s Manual
General Information 1-3
1.1.2 SUMMACUT USER’ S MANUAL
The User’ s Manual provides the following information:
• Full technical specifications for the SummaCut and the media to be cut.
• A complete description of the SummaCut main components.
• Step-by-step instructions for knife and pen installation, and media loading.
• Information on the control panel and the cutter’s parameters.
• Maintenance and cleaning instructions.
• Information about the interface cables used to inter-connect the cutter and IBM,
IBM-compatible, Macintosh and Macintosh-compatible host computers.
To Next Page