Tables xx
TABLE A-16 UPA64S (Vertical FFB) Connector Pinouts A-15
TABLE A-17 32-Bit PCI Connector Pinouts A-18
TABLE A-18 SCSI Internal Connector (Channel A) Pinouts A-19
TABLE A-19 SCSI External Connector (Channel B) Pinouts A-20
TABLE A-20 Floppy Connector A-21
TABLE A-21 DB-25 Serial Port Male Connector Pinouts A-22
TABLE A-22 Parallel Port Connector Pinouts A-23
TABLE A-23 Type RJ-45 Connector A-24
TABLE A-24 Sun Keyboard/Mouse Connector Pinouts A-25
TABLE A-25 PS/2 Mouse Connections A-26
TABLE A-26 PS/2 Keyboard Connections A-26
TABLE A-27 25-Pin Serial Channel A and B Connectors (Y Cable) A-27
TABLE B-1 Maximum Case Temperatures for Motherboard “Hot Spot” Components B-8
TABLE C-1 Materials Required (May be duplicated and used to record materials used) C-2
TABLE C-2 System and Peripheral Power Budgeting Requirements Table
(Duplicate and use as worksheet to budget for a specific configuration) C-3
TABLE C-3 Installation Information Work Sheet
(May be Duplicated and Used to Record Build Data) C-4
TABLE C-4 DIMM Configurations C-18
TABLE C-5 Acceptable DIMM Locations 10-bit Column Address Mode C-20
TABLE C-6 Acceptable DIMM Locations 11-bit Column Address Mode C-20
TABLE D-1 Commonly Used Commands D-8
TABLE D-2 NVRAM Configuration Variables D-9
TABLE E-1 Default Sun to PS/2 Equivalent Keystrokes E-7
TABLE E-2 Equivalent Sun and PS/2 Mouse Buttons E-9
TABLE F-1 SunVTS Release Summary F-1
TABLE F-2 SunVTS Test Reference Manual Chapter Applicability F-4
To Next Page
Loading...
Need help?
General