Chapter 6 First-Time Configuration 6-53
If you prefer to save and restore all configuration data, including LUN mapping
information, use Sun StorEdge Configuration Service and CLI software in addition to
saving your NVRAM controller configuration to disk. The information saved this
way can be used to rebuild all logical drives and therefore can be used to completely
duplicate an array configuration to another array.
Refer to the Sun StorEdge 3000 Family Configuration Service User’s Guide for
information about the “save configuration” and “load configuration” features. Refer
to the sccli man page or to the Sun StorEdge 3000 Family CLI User’s Guide for
information about the “reset nvram” and “download controller-configuration”
commands.
6.3 Using Software to Monitor and Manage
the Sun StorEdge Fibre Channel Array
This section describes the software management tools available for monitoring and
managing the Sun StorEdge 3510 and 3511 FC array with in-band connections.
Note – The Sun Storage CLI and the Sun StorEdge Configuration Service software
can also be accessed through the Ethernet port for out-of-band management of the
array. See “Setting Up Out-of-Band Management Over Ethernet” on page 4-20.
The following software management tools are provided on the Sun StorEdge 3000
Family Professional Storage Manager CD, provided with your array. The Sun
StorEdge 3000 Family Documentation CD provides the related user guides.
■ Sun StorEdge Configuration Service. Provides centralized storage configuration,
maintenance, and monitoring functions. Refer to the Sun StorEdge 3000 Family
Configuration Service User’s Guide for in-band setup procedures.
■ Sun StorEdge Diagnostic Reporter. Provides event monitoring and notification.
Refer to the Sun StorEdge Diagnostic Reporter User’s Guide for information.
■ Sun StorEdge Command-Line Interface (CLI). A command-line interface utility
that provides script-based management. Refer to the Sun StorEdge CLI User’s
Guide for CLI information.
For details on how to install Sun StorEdge Configuration Service, Sun StorEdge
Diagnostic Reporter, or the Sun StorEdge CLI software, refer to the Sun StorEdge
3000 Family Software Installation Manual.
The documentation CD for your array provides the related user guides, with
detailed installation and configuration procedures for Sun StorEdge Configuration
Service and Sun StorEdge Diagnostic Reporter.
To Next Page
Loading...
Need help?
General
