3-2 Sun StorEdge 3000 Family Installation, Operation, and Service Manual • May 2004
3.1 Opening Your Package
Follow these guidelines for unpacking the equipment.
Caution – To avoid personal injury or damage to the equipment during installation,
always use two people to remove the unit from its container. This unit weighs
approximately 60 pounds.
1. Select a suitable area for unpacking.
2. Store all packing material and boxes for possible equipment returns.
3. Check the contents sheet in your product package.
The contents sheet summarizes the standard contents for your product. See
“Checking the Package Contents” on page 3-3 for more information.
4. Compare the packing slip and the list of parts with the items you received.
If the list of parts on your packing slip does not match the items you received, or any
items appear damaged, immediately notify your carrier agent and the supplier who
prepared your shipment.
5. Carefully examine the cables provided in the package.
If any cable appears to be damaged, contact the technical service department for an
immediate replacement.
6. Check the list of “Customer-Provided Cables” on page 3-5.
These are required to complete your installation.
Note – You must purchase or provide fiber-optic cables for connecting Sun StorEdge
3510 and 3511 FC arrays to host servers.
To Next Page
Loading...
Need help?
General
