I-8 Sun StorEdge 3000 Family Installation, Operation, and Service Manual • May 2004
4. Choose Journaled File System to display the Journaled File System screen.
5. Choose Add a Journaled File System from the Journaled File System menu.
6. Choose Add a Standard Journaled File System to display the Volume Group Name
screen.
The Volume Group Name screen displays the names of available volume groups.
7. Move the cursor to highlight the name of the volume group you created in
“Creating a Volume Group” on page I-6.
The Add a Standard Journaled File System screen is displayed.
8. Specify the size of the file system you want to create by typing the number of
blocks you want next to SIZE of file system (in 512-byte blocks).
9. Next to MOUNT POINT, type the directory name (and path, if desired) on which
you want to mount the new file system.
Note – If the mount point directory does not exist, it is created.
When the file system is created, a status screen displays “Command: OK,” the
Journaled File System, the mount point, and the size of the file system.
I.8 Mounting the New File System
1. Return to the File Systems screen.
2. Choose List All File Systems from the File Systems menu to see the names of all
file systems.
3. Identify the name of the file system you created in the Name column, for example,
ldev/lv00.
4. Choose Mount a File System from the File Systems menu to display the Mount a
File System screen.
5. Type the name of the file system you identified in Step 3 next to FILE SYSTEM
name.
6. Type the name of the mount point you specified next to DIRECTORY over which
to mount.
When the file system is mounted, a status screen displays “Command: OK.”
7. Exit SMIT.
To Next Page
Loading...
Need help?
General
