SUNWARD SWE18UF - Page 125

OPERATION & MAINTENANCE MANUAL SWE18UF
115
(3) Noise & Vibration Description
1. According to ISO3744 & ISO6395, the machine fulfills the requirements of the Directive 2000/14/EC and
the directive 2005/88/EC, the description about noise and vibration are as below:
Machine noise：L
WA
= 93dB
2. Seat shock absorption: (damper in cab: standard configuration)
(4) Lifting Capacity
Lifting Capacity
Height of lift
point
Lift point radius(max.)
Lift point radius
(3.0m)
Lift point radius
(2.0m)
Right
ahead(kg)
Side(kg)
Right
ahead(kg)
Side(kg)
Right
ahead (kg)
Side(kg)
2.0m
261.00*
252.30*
234.90*
247.95*
-
-
1.0m
269.70*
191.25*
304.50*
300.15*
469.80*
482.85*
0m
308.85*
195.00*
374.10*
225.00*
617.70*
378.75*
―1.0m
330.60*
225.00*
330.60*
225.00*
352.50*
352.50*
Note:
1) The load marked with "*" is restricted by the hydraulic capacity based on the standard of ISO10567,
in which mentioning related load should not be over than 87% of the hydraulic capacity.
2) The load without "*" is restricted by the tipping load based on the standard of ISO10567B, in which
mentioning related load should not be over than 75% of anti-tipping capacity.
3) Attachments of excavator, such as bucket and lift hook, are not included in this table.
Test point
Standard（G）
Working
status
Low speed 1300 rpm
High speed 2360 rpm
Seat
≤0.128
Accelerated
speed（G）
Amplitude
（mm）
Accelerated
（G）
Amplitude
（mm）
Static
（idling）
0.07
0.042
0.09
0.066
Lifting point
Lifting height
Center of Gyration
Lifting radius