OPERATION & MAINTENANCE MANUAL SWE18UF
44
3.3 MONITOR
FIG. 3.4.1
1 — Fuel level warning 2 — Coolant temperature warning
3 — Low engine oil pressure warning 4 — Work light indicator
5 — High travel speed indication light 6 — Preheating indication light
7 — Charging indication light 8 — Air filter clogged warning
9 — Flame-out warning 10— Engine coolant temperature
11— Mute button 12— High travel speed control
13— Clock 14— Work light button
15— Interface alternating button 16— Working hour meter
17—Fuel level indication 18— Engine speed indication
Check operation control
1 — Fuel level warning
When fuel level is lower than 10%, this indicator light comes on.
2 —Coolant temperature warning
When coolant temperature is higher than 105°, this indication light comes on.
3 — Low engine oil pressure warning
This indicates engine oil pressure. When system is powered on, the engine is not started, and this
symbol lights up. If engine oil pressure signal line is broken or the sensor is damaged, the buzzer will
sound and a prompt display on the screen, showing that engine oil pressure is abnormal; When staring
engine, engine oil pressure is normal, the indication light will be off. If engine oil pressure is low, this
To Next Page
Loading...
