OPERATION & MAINTENANCE MANUAL SWE18UF
45
indication lights up, buzzer will sound and a prompt displays on the screen, showing that engine oil
pressure is low.
4 — Work indication light
This light is on when the working light of system is on. Press it again to turn off the light.
5 — High travel speed indication light
Press down this button to change to high travel speed, press it again to change to low travel speed.
6 — Preheating indication light
When starting the engine in cold days, turn the key to warm-up position, the indication light of
preheating lights up, and a prompt displays on the screen, showing that “preheating…”, after 15 seconds,
“preheating has been finished” displays on the screen.
7 — Charging indication light
Here refers to engine charging signal. When the system is powered on, engine is not started, this
indicator light comes up, if the charging signal wire is broken or the sensor is damaged, buzzer will sound
and a prompt will display on the screen, showing “charging is abnormal”; When engine is started and
charging is normal, the indication light is off. If charging is abnormal, this indication light will come on,
buzzer will sound and a prompt will display on the screen, showing that “charging is abnormal”.
8 — Air filter clogged warning
When air filter element is clogged, this indication light comes on, and a prompt displays on the screen,
showing that “Air filter is clogged”. At this moment, machine should be shut down immediately to clean
or change air filter element.
9 — Flame-out warning
This indicator light comes on when the engine working condition is abnormal (the engine oil pressure
is low or coiling water temperature is high); and the buzzer sound; after 30seconds engine stops working.
10— Engine coolant temperature
This indicates the fuel level. The pointer is within green range when the fuel level is normal; if it goes
into the red range, means coolant temperature is too high.
11— Mute button
When the monitor warns, press this button can stop the sound of buzzer alarming.
12—High travel speed control
Press this button, the machine will travel at high speed; press the button again, it will travel at low
speed.
13— Clock
Here indicates real-time clock.
14— Work light button
Press down this button to turn on the work light, press it again to turn it.
Note: Turn on the work light when it’s dim or dark.
15— Interface alternating button
To Next Page
Loading...
