SUNWARD SWE18UF - Safety Labels; Location of Safety Labels; Safety Labels Instructions

OPERATION & MAINTENANCE MANUAL SWE18UF
2
1.1 SAFETY LABELS
1.1.1 Location of Safety Labels
 Fully understand the correct position and contents of safety labels in this machine.
 To ensure that the content of labels can be read properly, be sure that they are in right place and
always keep them clean. When cleaning them, do not use solvents or gasoline. It may cause
labels to peel off.
 There are also other labels in addition to warning labels. Handle these labels in the same way.
 In case the labels are damaged, lost or not legible, replace them with new ones. For details of
the part number, refer to parts manual or actual label, and place an order with SUNWARD or
our authorized distributors.
1.1.2 Safety Labels Instructions
(1) Safety Operation Label
 Please read all safety precautions carefully written in labels
and all information concerning safety, prior to operate
machine.
 Maintenance frequently and replace safety label if required.
In case that safety labels or manual are damaged or lost,
you can place an order with our distributors. The procedure
of ordering them is identical with that of the other parts and
components. You must specify model of the machine when
ordering.
 Use only trained and qualified personnel to operate this
machine. Follow all safety precautions and instructions in
this manual to keep your machine in good condition.
 Do not alter or modify machine rashly, this may impair
function and effect service life or jeopardize personal
safety.
 Caution: all safety information described in this manual
covers only basic safety information of this machine. It’s