SUNWARD SWE18UF - SAFETY MAINTENANCE INFORMATION

OPERATION & MAINTENANCE MANUAL SWE18UF
17
1.2.20 Keeping Away From Running Parts
 Use extreme care to operate in vicinity of driving parts
to prevent hands, feet, hair and clothing being caught in
machine.
1.2.21 Preventing Fire and Explosion
 No smoke or using naked flame around fuel and engine
oil.
 Stop engine before refilling.
 Do not spill oil to hot surface or electrical equipment of
machine.
 Secure and lock oil cap after adding oil.
 Wipe off oil dirt; remove all flammable or explosive
material.
 Do not weld or cut pipelines that contain flammable
fluids.
 Keep wire terminals secured and clean.
 All leads must be free of damage. Prevent fire due to
short circuit of damaged leads and machine.
 Prevent spark due to static electricity or friction.
1.2.22 Measures for Fire Fighting
 Switch starting key to “OFF” position to stop engine.
 Get out of machine by utilizing handrail and steps.
 Contact fire department and colleagues and superior.
Extinguish fire with fire extinguisher.
1.2.23 Preventing Splashing or Falling Objects
 Wear protection glasses or goggles to avoid injury
resulting from fly-out and falling object (such as metal
particles or sand rock).
 When hitting, make working area off-limits to the other
person.
 Machine must be fitted with falling object protective
structure (FOPS) and front protective structure. If
machine is used in mining area or quarry where there is
a risk of falling rocks.