SUNWARD SWE18UF - 30 Waste Material Disposal; Prohibition of Unauthorized Modification on Machine; Preventing Objects Falling from High Altitude; Safe Operation Instructions

OPERATION & MAINTENANCE MANUAL SWE18UF
20
1.2.30Waste Material Disposal
 Observe local laws and regulations to dispose of waste
material, such as fuel, coolant etc.
1.2.31 Prohibition of Unauthorized Modification on Machine
 Any unauthorized modification to machine may involve
hazards.
 SUNWARD disclaim any responsibility for damage,
injury or accidents arising from unauthorized
modification.
1.2.32 Preventing Objects Falling From High Altitude
Object falling from high altitude mainly refers to the falling of
buildings, structures or other facilities and hanging objects, which may
cause personal injury, heavy losses of possessions. Prior to operating
nearby high buildings, carefully inspection of surrounded environment
should be taken to eliminate the hidden danger of objects falling from high
altitude or other hidden safety hazard.
1.3 SAFE OPERATION INSTRUCTIONS
1.3.1 Inspection before Starting Engine
Before starting daily routine inspection, carry out the
following checks.
 Wipe off dust on glass window to secure visual field.
 Wipe off dust on the surface of front light and working
lamp, check to ensure they are properly functioning.
 Check coolant level, fuel level and oil level in engine
oil pan. Check air filter for clogging, check wiring for
damage.
 Adjust operator’s seat to a position where it is easy to
carry out operation. Check seat belt or mounting clamps
for damage or wear.
 Check meters to ensure they are functioning properly.
Check working lamp angle. Make sure control levers
are at neutral position.
 Check safe lock control levers to ensure they are in
LOCK (UP) position before starting engine.