SUNWARD SWE18UF - Correct Maintenance and Inspection Procedure; Periodic Maintenance; Checking Hour Meter Frequently

OPERATION & MAINTENANCE MANUAL SWE18UF
79
FIG.5-1
5.1 CORRECT MAINTENANCE AND INSPECTION
PROCEDURE
Please read this manual carefully and learn how to maintain
excavator correctly. Follow the correct maintenance and
inspection procedures in this manual.
Check excavator before daily operation.
1) Check monitor.
2) Check all liquid level.
3) Check leakage, distortion, abrasion, and damage of hoses
and pipes.
4) Check noise and temperature around excavator.
5) Check slack or loss of parts.
Repair the excavator before operation if the machine has problems, or consult your dealer.
5.1.1 Periodic Maintenance
Carry out all recommended maintenance in this manual. (in the next page)
5.1.2 Checking Hour Meter Frequently
Determine when to take regular maintenance according to the hour meter.
 Use recommended fuel, hydraulic oil and lubricant.
 Only use genuine SUNWARD parts.
 If user doesn’t use recommended fuel, hydraulic oil, lubricant and genuine SUNWARD parts,
the warranty will automatically be invalid.
 Never adjust engine rev limiter or hydraulic system safety valve.
 Avoid electric parts touching water and vapor.
 Never disassemble engine pump controller, sensor, etc.
FIG. 5-2
图. 3-18