Supermicro X14SAE - Graphics Configuration Menu; DMI Configuration Menu

Graphics Configuration Menu
►Graphics Configuration
This submenu allows you to configure the graphics configuration settings.
Graphics Configuration
IGFX GOP Version
Skip Scanning of External Gfx Card
If this feature is enabled, the system will not scan for an external graphics card on PEG and
PCIe slots. The options are Disabled and Enabled.
Primary Display
Use this feature to select the primary video display. The options are Auto and IGFX.
Internal Graphics
Select Auto to keep an internal graphics device installed on an expansion slot supported by the
CPU to be automatically enabled. The options are Auto, Disabled, and Enabled.
DVMT Pre-Allocated
Dynamic Video Memory Technology (DVMT) allows dynamic allocation of system memory to
be used for video devices to ensure best use of available system memory based on the DVMT
5.0 platform. The options are 0M, 32M, 64M, 96M, 128M, 4M, 8M, 12M, 16M, 20M, 24M, 28M,
32M/F7, 36M, 40M, 44M, 48M, 52M, 56M, and 60M.
Configure GT for use
Use this feature to enable or disable GT configuration. The options are Disabled and Enabled.
PAVP Enable
Use this feature to enable or disable PAVP support. The options are Disabled and Enabled.
DMI Configuration Menu
►DMI Configuration
This submenu allows you to configure the DMI configuration settings.
DMI ASPM
Use this feature to set the Active State Power Management (ASPM) state on the System Agent
(SA) side of the DMI Link. The options are Disabled, ASPM L1, and Auto.
100
X14SAE/X14SAE-F: UEFI BIOS