Supermicro X14SAE - Intel(R) Rapid Storage Technology Menu

►Enroll Certification
This feature allows you to enroll the certificate in the system.
►Enroll Certification Using File
This feature allows you to enroll the security certificate in the system by using a file.
Certification GUID
Press <Enter> and input the certification Global Unique Identifier (GUID).
►Commit Changes and Exit
Use this feature to save all changes and exit TLS settings.
►Discard Changes and Exit
Use this feature to discard all changes and exit TLS settings.
►Delete Certification
This feature is used to delete the certificate if a certificate has been enrolled in the system.
►Client Certification Configuration
Intel(R) Rapid Storage Technology Menu
Note: This submenu is available only when Advanced > VMD Setup Menu > "Enabled VMD
controller" feature is set to Enabled and the changes have taken effect after you save
settings and reboot the system.
Intel(R) RST xx.xx.xxxx RST VMD Driver
►Create RAID Volume
This submenu will only appear when VMD controller is enabled and the root port of the
storage device for RAID array has been mapped under VMD. The mapped storage devices
will appear in the Non-RAID Physical Disks list. For information on VMD configurations,
please refer to the "VMD Setup Menu" feature.
Name
Enter a unique name for the RAID volume. The name must not contain space at the
beginning or backslash and must be under 16 characters. The default is Volume1.
121
X14SAE/X14SAE-F: UEFI BIOS