Supermicro X14SAE - PEG Port Configuration; GT - Power Management Control

PEG Port Configuration
►PEG Port Configuration
CPU SLOT6 PCIe 5.0 x16
CPU SLOT3 PCIe 5.0 x8 (IN X16)
CPU SLOT3 PCIe 5.0 x8 (IN X16)
Enable Root Port
Use this feature to enable or disable the PCIe Graphics (PEG) device in the specified port . The
options are Disabled and Enabled.
Max Link Speed
Use this feature to select PCIe support for the device installed the M.2 specified port. The
options are Auto, Gen1, Gen2, Gen3, Gen4, and Gen5.
CPU SLOT7 PCIe 4.0 x4
Enable Root Port
Use this feature to enable or disable the PCIe Graphics (PEG) device in the specified port . The
options are Disabled and Enabled.
Max Link Speed
Use this feature to select PCIe support for the device installed the M.2 specified port. The
options are Auto, Gen1, Gen2, Gen3, and Gen4.
M.2-C1
Enable Root Port
Use this feature to enable or disable the PCIe Graphics (PEG) device in the specified port . The
options are Disabled and Enabled.
Max Link Speed
Use this feature to select PCIe support for the device installed the M.2 specified port. The
options are Auto, Gen1, Gen2, Gen3, Gen4, and Gen5.
GT - Power Management Control
GT - Power Management Control
RC6 (Render Standby)
Use this feature to enable render standby support. The options are Disabled and Enabled.
101
X14SAE/X14SAE-F: UEFI BIOS