2.8 Front Control Panel
JFP1 on the X14SAE/X14SAE-F motherboard contains header pins for various buttons and
indicators that are normally located on a control panel at the front of the chassis. These
connectors are designed specifically for use with Supermicro chassis. See the figure below for
the descriptions of the front control panel buttons and LED indicators.
Figure 2-33. Front Control Panel Pin Definitions
For a detailed diagram of the X14SAE/X14SAE-F motherboard, see the layout under "Quick
Reference" on page 13.
58
X14SAE/X14SAE-F: Component Installation
To Next Page
Loading...
