Supermicro X14SAE - MAC:(MAC Address)-Ipv6 Network Configuration Menu

Local IP Address (Available when "Configured" is set to Enabled and "Enabled DHCP"
is set to Disabled)
Use this feature to enter an IP address for the local machine.
Local NetMask (Available when "Configured" is set to Enabled and "Enabled DHCP" is
set to Disabled)
Use this feature to set the netmask for the local machine.
Local Gateway (Available when "Configured" is set to Enabled and "Enabled DHCP" is
set to Disabled)
Use this feature to set the gateway address for the local machine.
Local DNS Servers (Available when "Configured" is set to Enabled and "Enabled
DHCP" is set to Disabled)
Use this feature to set the Domain Name System (DNS) server address for the local machine.
Save Changes and Exit
Press <Enter> to save changes and exit.
MAC:(MAC address)-IPv6 Network Configuration Menu
►MAC:(MAC address)-IPv6 Network Configuration
►Enter Configuration Menu
The following information is displayed.
l
Interface Name
l
Interface Type
l
MAC address
l
Host address
l
Route Table
l
Gateway addresses
l
DNS addresses
Interface ID
Use this feature to change/enter the 64-bit alternative interface ID for the device. The string
format is colon separated. The default setting is the MAC address above.
108
X14SAE/X14SAE-F: UEFI BIOS