Supermicro X14SAE - If the RHEL 9.4 Installation Stops

If the RHEL 9.4 Installation Stops
If the RHEL 9.4 installation process stops at "Started GNOME Display Manager," you can
resolve this issue by following the workaround recommended by Red Hat:
1. Switch to text mode during the installation.
2. Edit the configuration file located at /etc/gdm/custom.conf, and remove the comment
symbol (#) from the line "WaylandEnable=false".
3. Restart the GNOME Display Manager (GDM) service using the following command:
# systemctl restart gdm
81
X14SAE/X14SAE-F: Troubleshooting