AMT Configuration
USB Provisioning of AMT
Use this feature to enable or disable USB provisioning. The options are Disabled and Enabled.
MAC Pass Through
Use this feature to enable or disable the MAC Pass Through function. The options are
Disabled and Enabled.
Activate Remote Assistance Process
Use this feature to activate Remote Assistance. Enabling this feature will also trigger the Client
Initiated Remote Access (CIRA) boot. The options are Disabled and Enabled.
Unconfigure ME
Use this feature to unconfigure ME with resetting the MEBx password to default on next boot.
The options are Disabled and Enabled.
ASF Configuration
PET Progress
Use this feature to enable or disable PET Events Progress to receive PET Events alerts. The
options are Disabled and Enabled.
WatchDog
Select Enabled to allow AMT to reset or power down the system if the operating system or
BIOS hangs or crashes. The options are Disabled and Enabled.
OS Timer / BIOS Timer
These options appear if WatchDog (above) is enabled. This is a timed delay in seconds, before
a system power down or reset after a BIOS or operating system failure is detected. Enter the
value in seconds. The default setting is 0.
ASF Sensors Table
Enable this feature for the ASF Sensor Table to be added into the ASF ACPI table. The options
are Disabled and Enabled.
Secure Erase Configuration
Secure Erase mode
Select Real to securely erase a solid state drive. The options are Simulated and Real.
Force Secure Erase
Select Enabled to force a secure erase of the solid state drive on the next boot. The options are
Disabled and Enabled.
110
X14SAE/X14SAE-F: UEFI BIOS
To Next Page
Loading...
