Power Button
The Power Button connection is located on pins 1 and 2 of JFP1 on the X14SAE/X14SAE-F
motherboard. Momentarily contacting both pins will power on/off the system. This button can
also be configured to function as a suspend button (with a setting in the BIOS). To turn off the
power when the system is in suspend mode, press the button for four seconds or longer.
For a detailed diagram of the X14SAE/X14SAE-F motherboard, see the layout under "Quick
Reference" on page 13.
Power Button
Pin Definitions (JFP1)
Pin# Definition
1 Signal
2 GND
Reset Button
The Reset Button connection is located on pins 3 and 4 of JFP1 on the X14SAE/X14SAE-F
motherboard. Attach it to a hardware reset switch on the computer case to reset the system.
For a detailed diagram of the X14SAE/X14SAE-F motherboard, see the layout under "Quick
Reference" on page 13.
Reset Button
Pin Definitions (JFP1)
Pin# Definition
3 Reset
4 GND
Power Fail LED (X14SAE-F)
The Power Fail LED connection is located on pins 5 and 6 of JFP1 on the X14SAE/X14SAE-F
motherboard.
For a detailed diagram of the X14SAE/X14SAE-F motherboard, see the layout under "Quick
Reference" on page 13.
59
X14SAE/X14SAE-F: Component Installation
To Next Page
Loading...
