Supermicro X14SAE - MAC:(MAC Address)-Ipv6 Network Configuration Menu

Enable DHCP (Available when "Configured" is set to Enabled)
Select Enabled to support Dynamic Host Configuration Protocol (DHCP), which allows the
BIOS to search for a DHCP server attached to the network and request the next available IP
address for this computer. The options are Disabled and Enabled.
Local IP Address (Available when "Configured" is set to Enabled and "Enabled DHCP"
is set to Disabled)
Use this feature to enter an IP address for the local machine.
Local NetMask (Available when "Configured" is set to Enabled and "Enabled DHCP" is
set to Disabled)
Use this feature to set the netmask for the local machine.
Local Gateway (Available when "Configured" is set to Enabled and "Enabled DHCP" is
set to Disabled)
Use this feature to set the gateway address for the local machine.
Local DNS Servers (Available when "Configured" is set to Enabled and "Enabled
DHCP" is set to Disabled)
Use this feature to set the Domain Name System (DNS) server address for the local machine.
Save Changes and Exit
Press <Enter> to save changes and exit.
MAC:(MAC address)-IPv6 Network Configuration Menu
►MAC:(MAC address)-IPv6 Network Configuration
►Enter Configuration Menu
The following information is displayed.
l
Interface Name
l
Interface Type
l
MAC address
l
Host address
l
Route Table
l
Gateway addresses
l
DNS addresses
106
X14SAE/X14SAE-F: UEFI BIOS