Map PCH SATA Controller under VMD (Available when Enable VMD Controller is set to
"Enabled")
Use this feature to map or unmap the selected root port to VMD. The options are Disabled and
Enabled.
Serial Port Console Redirection Menu
►Serial Port Console Redirection
COM1 (Available when your system supports the serial port of COM1)
Console Redirection
Select Enabled to enable COM port 1 for Console Redirection, which allows a client machine to
be connected to a host machine at a remote site for networking. The options are Disabled and
Enabled.
Note: This feature will be set to Enabled if there is no BMC support.
SOL/COM2
Note: This feature is available when your system supports serial port of SOL and/or COM2.
The "SOL/COM2" here indicates a shared serial port, and SOL is used as the default.
Console Redirection
Select Enabled to use the SOL/COM2 port for Console Redirection. The options are Disabled
and Enabled.
AMT SOL Console Redirection
Select Enabled to enable console redirection support for the specified serial port. The options
are Disabled and Enabled.
►Console Redirection Settings
Note: This submenu is available when "Console Redirection" for COM1, SOL/COM2, or
AMT SOL is set to Enabled.
Terminal Type
Use this feature to select the target terminal emulation type for Console Redirection. Select
VT100 to use the ASCII Character set. Select VT100+ to add color and function key support.
114
X14SAE/X14SAE-F: UEFI BIOS
To Next Page
Loading...
