Supermicro X14SAE - Save & Exit

4.8 Save & Exit
Select Save & Exit from the BIOS Setup screen to configure the settings below.
Figure 4-7. Save & Exit Screen
Save Options
Discard Changes and Exit
Use this feature to exit from the BIOS Setup utility without making any permanent changes to
the system configuration and reboot the computer.
Save Changes and Reset
On completing the system configuration changes, use this feature to exit the BIOS Setup utility
and reboot the computer for the new system configuration parameters to take effect.
Save Changes
On completing the system configuration changes, use this feature to save all changes made.
This will not reset (reboot) the system.
138
X14SAE/X14SAE-F: UEFI BIOS