2.9 Connections, Jumpers, and LEDs
Refer to the following sections for information about connections, jumpers, and LEDs for the
X14SAE/X14SAE-F motherboard.
Power Connections
For information about the power connections of the X14SAE/X14SAE-F motherboard, refer to
the following content.
Important: To provide adequate power supply to the motherboard, be sure to connect the
24-pin ATX PWR and the 8-pin PWR connections to the power supply. Failure to do so may
void the manufacturer warranty on your power supply and motherboard.
Power Supply
As with all computer products, a stable power source is necessary for proper and reliable
operation. It is even more important for processors that have high CPU clock rates where noisy
power transmission is present.
It is strongly recommended that you use a high quality power supply that meets ATX power
supply Specification 2.02 or above.
ATX Power Supply Connection
The primary 24-pin power supply connection (JPW1 on the X14SAE/X14SAE-F motherboard)
meets the ATX SSI EPS 12 V specification. JPW2 is an 8-pin +12 V DC power input for the
processor that must be connected to the power supply.
Important: To provide adequate power supply to the motherboard, be sure to connect the
24-pin ATX PWR and the 8-pin PWR connections to the power supply. Failure to do so may
void the manufacturer warranty on your power supply and motherboard.
For a detailed diagram of the X14SAE/X14SAE-F motherboard, see the layout under "Quick
Reference" on page 13.
63
X14SAE/X14SAE-F: Component Installation
To Next Page
Loading...
