Unit ID (UID) LED (X14SAE-F)
The UID LED indicator is located at UID on the X14SAE/X14SAE-F motherboard. This UID
indicator provides easy identification of a system that may need services.
For a detailed diagram of the X14SAE/X14SAE-F motherboard, see the layout under "Quick
Reference" on page 13.
UID LED
LED Indicator
LED Color Definitions
Blue: On System Identified
Onboard Power LED
An Onboard Power LED is located at LEDPWR on the X14SAE/X14SAE- F motherboard.
When LEDPWR is on, the AC power cable is connected and the system is on. When LEDPWR
is blinking, it is in standby (S3, suspend to RAM) mode.
For a detailed diagram of the X14SAE/X14SAE-F motherboard, see the layout under "Quick
Reference" on page 13.
Onboard Power LED Indicator
LED Color Definition
Off System Power Off
On System Power On
Blinking S3, suspend to RAM
Standby Power / BMC Heartbeat LED
For X14SAE, the LEDBMC works as a standby power LED. When the LED is solid green, the
standby power is on. For X14SAE-F, the LEDBMC works as a BMC Heartbeat LED. When this
LED is blinking, the BMC is functioning normally.
For a detailed diagram of the X14SAE/X14SAE-F motherboard, see the layout under "Quick
Reference" on page 13.
Standby Power / BMC Heartbeat LED Indicator
Motherboard LED Color/State Definition
X14SAE Green: Solid On Standby Power On
X14SAE-F Green: Blinking BMC Normal
76
X14SAE/X14SAE-F: Component Installation
To Next Page
Loading...
