Supermicro X14SAE - PCH-FW Configuration

DAD Transmit Count
Use this feature to set the number of consecutive neighbor solicitation messages have been
sent while performing duplicate address detection on a tentative address. The default setting
is 1.
Policy
Use this feature to select how the policy is to be configured. The options are automatic and
manual.
►Advanced Configuration
Note: This submenu is available when "Policy" is set to manual.
New IPv6 address: Use this feature to enter the IPv6 address for the local machine.
New Gateway addresses: Use this feature to set the gateway address for the local
machine.
New DNS addresses: Use this feature to set the DNS server address for the local
machine.
Commit Changes and Exit: Press <Enter> to save changes and exit.
Discard Changes and Exit: Press <Enter> to discard changes and exit.
Save Changes and Exit
Press <Enter> to save changes and exit.
PCH-FW Configuration
ME Firmware Version: 19.0.0.1797
ME Firmware Mode: Normal Mode
ME Firmware SKU: Corporate SKU
ME FW Image Re-Flash
Use this feature to update the Management Engine firmware. The options are Disabled and
Enabled.
TPM Device Selection
Use this feature to select dTPM or PTT for the TPM device. dTPM is discrete Trusted Platform
Module and PTT is Platform Trusted Technology. The options are dTPM and PTT.
109
X14SAE/X14SAE-F: UEFI BIOS