2.7 Rear I/O Ports
Figure 2-31. Rear I/O Ports (X14SAE-F)
Rear I/O Ports
No. Descriptions No. Descriptions No. Descriptions
1 DisplayPort 2.1 7
LAN1: RJ45 1 GbE LAN
Port
13
Center / LFE
Out
2 HDMI 2.1 Port 8
USB5: USB 3.2 Gen 2x1
Port (10 Gb, Type-A)
14 Surround Out
3
VGA Port (X14SAE-F
only)
9
USB8: USB 3.2 Gen 2x2
Port (20 Gb, Type-C)
15 S/PDIF Out
4
UID Switch (X14SAE-F
only)
10
LAN2: RJ45 2.5 GbE LAN
Port
16 Line In
5
Dedicated BMC LAN Port
(X14SAE-F only)
11
USB6: USB 3.2 Gen 2x1
Port (10 Gb, Type-A)
17 Line Out
6
USB10: TBT 4 (40 Gb,
Type-C)
12
USB7: USB 3.2 Gen 2x1
Port (10 Gb, Type-A)
18 Mic In
DisplayPort
DisplayPort 2.1, developed by the VESA consortium, delivers digital display at a fast refresh
rate. It can connect to virtually any display device using a DisplayPort adapter for devices, such
as VGA, DVI, and HDMI.
For a detailed diagram of the X14SAE/X14SAE-F motherboard, see the layout under "Quick
Reference" on page 13.
HDMI Port
One High-Definition Multimedia Interface (HDMI) 2.1 port is located on the rear I/O of the
X14SAE/X14SAE-F motherboard. This port is used to display both high definition video and
digital sound through an HDMI display, using a single HDMI cable (not included).
55
X14SAE/X14SAE-F: Component Installation
To Next Page
Loading...
