RAID Level
Select the desired RAID level for the RAID volume. The options are RAID0 (Stripe), RAID1
(Mirror), RAID5 (Parity), and RAID10 (RAID0+1). Available RAID levels depend on the
number of disks connected to the system.
Select Disks
To select a desired RAID disk, select X from the drop-down list. Repeat this step to select all
the desired disks for the RAID volume. For RAID0/RAID1/RAID5/RAID10, the minimum
number of disks required is two/two/three/four respectively.
Strip Size (Available for RAID0/RAID5/RAID10 Only)
Select the desired RAID strip size for your RAID volume. The options vary according the
RAID level you select.
Capacity (MB)
Enter the capacity in megabytes(MB) of the RAID volume to be created.
►Create Volume
After finishing the configuration of the Create RAID Volume feature, select Create Volume
and you will return to the previous screen displaying the information about the created RAID
volume.
RAID Volumes
This feature displays the RAID volumes you have created. You can click the created RAID
volume to view more information.
RAID VOLUME INFO
Volume Actions
►Delete
This feature allows you to delete a RAID volume. When asked to confirm deletion of the
RAID volume, select Yes to delete the RAID volume.
Note: When deleting a RAID volume, all data on the disks will be deleted as well.
For a created RAID Volume, the following information will be displayed:
l
Name
l
RAID Level
l
Strip Size
122
X14SAE/X14SAE-F: UEFI BIOS
To Next Page
Loading...
