Note: This submenu is available when "Secure Boot Mode" is set to Custom.
►Enter Deployed Mode / Exit Deployed Mode
Select Ok to reset system to the User Mode or to the Deployed Mode.
Note: This submenu is available when "Secure Boot Mode" is set to Custom.
►Key Management
The following information is displayed:
l
Vendor Keys
Note: This submenu is available when "Secure Boot Mode" is set to Custom.
Provision Factory Defaults
Select Enabled to install provision factory default settings after a platform reset while the
system is in the Setup Mode. The options are Disabled and Enabled.
►Restore Factory Keys
Select Yes to restore manufacturer default keys to ensure system security. The options
are Yes and No. Selecting Yes will reset system to the Deployed mode.
Note: This submenu is available when any secure keys have been installed.
►Reset To Setup Mode
This feature resets the system to the Setup Mode. The options are Yes and No.
Note: This submenu is available when any secure keys have been installed.
►Enroll Efi Image
This feature allows the Efi image to run in the secure boot mode, which will enroll the
SHA256 Hash certificate of a PE image into the Authorized Signature Database (DB).
►Export Secure Boot Variables
This feature exports the NVRAM contents of secure boot variables to a storage device.
The options are Yes and No.
132
X14SAE/X14SAE-F: UEFI BIOS
To Next Page
Loading...
